Unikote M


i Easily applied over weld on or Module hot face and furnace top floors.
i Adhere readily to fibre modules during the thermal cycling process.
i Reduces module shrinkage by keeping the hot face “tight”.
i Guards the ceramic fibre Module against metal oxide, chemical and contaminant attack.
i Protects against the velocity damage and erosion from particulate matter.
i Excellent resistance to chemical attack exceptions includes hydrochloric acid, Phosphoric acid and strong alkalies.


i Classification temperature: 1425 ° C


i Applied over weld on or veneering modules hot face surface.
i Used to reduce airborne fibre or other refractory particles.
i Coil annealing furnaces
i Re heat furnace doors lining
i Process heaters lining
i Ammonia reformers and crude oil heaters lining
i Shuttle kiln
i Tunnel kilns


Unikote M is a refractory coating material designed to provide a protective surface layer over ceramic fibre modules. Unikote M is for high to medium temperature, gas fired furnaces where contaminants are not severe.


i Standard sizes: 5, 10, 25 and 50 kgs

< 25.0[/av_cell][/av_row] [av_row row_style='' av_uid='av-13rcrq'][av_cell col_style='' av_uid='av-vxtqm']Linear shrinkage % after firing - 5 hrs[/av_cell][av_cell col_style='' av_uid='av-st6ye']0.75 (At 1315°C)[/av_cell][/av_row] [av_row row_style='' av_uid='av-mks92'][av_cell col_style='' av_uid='av-ebpt2']Coverage ( Kg / m2)[/av_cell][av_cell col_style='' av_uid='av-8smda']3.8[/av_cell][/av_row] [/av_table]